Flatbed Trailer 3-Axle Technical Specifications; Chassis: Manufactured from ST 52 special steel, sheet metal and flat bars, joined by dovetail joints and welded using robotic welding machines. King Pin: Made of 42 Cr Mo4 forged steel, mounted with 8 bolts, 2” in diameter, according to SAE standards. Axles: 3 x 12000 kg capacity drum axle assembly. Sealed bearing system. Brake System: Double-circuit pneumatic brake valve with load-sensitive regulator (WABCO) EBS Brake System (WABCO) Generally has a double-line brake system with ABS or EBS brakes. Air Suspension: Air suspension system. 300 mm airbags. Angle-adjustable level valve. Parabolic leaf springs and shock absorbers to limit excessive axle movement for protection. Front and center axle lifting (controlled from inside the cabin). Loading-unloading ramp adjustment lever. Legs: Double-speed telescopic push-type mechanical legs with a 24000 kg load capacity. Footrest Rear Bumper: Rear bumper suitable for 70/221/AT version. Wheel Block: 1 parking wheel block with carriers. Tires and Rims: 6 Pirelli - Lassa brand 385/65 R 22.5 Tubeless tires. 11.75 – 22.5 Plot Rims Fender: 6 complete plastic fenders. Paint: The material is cleaned and sandblasted with grit (metal) material. Phosphate coating is applied. Then 2 coats of epoxy primer paint are applied, and the final coat is painted with 2 coats of acrylic paint in the desired color. Electrical Equipment and Lighting: 3 amber colored lamps on the sides Parking lights, license plate light, triangular reflector at the rear. 2 x 7-pin electrical sockets Accessories: Length: 9000 mm Width: 3000 mm Floor Steel: 6 mm Patterned sheet metal. Floor Accessories: 8 mm Crossbar.